For Technical Assistance, Call 1-87-REFINISH
(1-877-334-6474)
© 2009, ADVANTAGE REFINISH PRODUCTS, All rights reserved. All information and images on the Autobody Brands website are copyrighted material. Unauthorized use of these materials is strictly prohibited.

website designed & maintained
by RHCreative.com

Primer Surfacers

 

Direct To Metal - DTM - 325 - 326
Products
High Build 2KGray DTM Primer Filler/Sealer -
2.1 VOC
• Gallon (#325-01)
  - Quantity: 4/cs
• Quart (#325-04)
  - Quantity: 6/cs
High Build 2K DTM Activator
• Quart (#326-04)
  - Quantity: 12/cs
• 1/2 Pint (#326-16)
  - Quantity: 12/cs
Product MSDS

#325 HIGH BUILD 2K GRAY DTM PRIMER FILLER/SEALER - 2.1 VOC

PRODUCT DESCRIPTION:
ADVANTAGE #325 Primer is formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding.

SURFACE PREPARATION:
Clean all areas to be primed with compliant Wax & Grease Remover to remove all dirt, wax, grease, and other contaminants. Featheredge and sand the original finish. Surface must be clean and dry. Note: Rust and oxidation must be removed prior to applying primer by sanding, grinding, or sand blasting.

MIXING DIRECTIONS:    
High Build
Primer Filler
Regular Build
Primer Filler
Primer Sealer
4 PARTS #325 Primer
1 PART #326 Activator
4 PARTS #325 Primer
1 PART #326 Activator
1 PART Urethane Reducer -
Nat’l Rule Acetone - California
4 PARTS #325 Primer
1 PART #326 Activator
2 PARTS Urethane Reducer - Nat’l Rule Acetone - California

APPLICATION DIRECTIONS & POT LIFE:
Spray one to three medium wet coats allowing 10-20 minutes flash between coats. Pot Life is: 2-3 hours @ 77° F.

ADDITIVES:  
ACCELERATOR: N/A FISHEYE: N/A
FLEX ADDITIVE: Not required Note: Do not spray when surface temperature is
below 50°F

CLEAN-UP:
Clean spray equipment immediately after use with Virgin Wash Thinner.

SUBSTRATES:
Properly cleaned and sanded aluminum, steel, galvanized steel or sand blasted steel. Properly cleaned and sanded fiberglass, SMC, E-Coat and OEM finish.

GUN SETUPS: AIR PRESSURES
CONVENTIONAL CONVENTIONAL @ Gun PANEL OVERALL
Gravity Feed:
1.6 mm - 2.0 mm
Gravity Feed: 30-35 psi 40-45 psi
Siphon Feed:
1.8 mm - 2.0 mm
Siphon Feed: 30-40 psi 45-55 psi
HVLP:
1.6 mm - 2.0 mm
HVLP @ Cap: 6-8 psi 8-10 psi

FLASH/DRY TIMES: Please Note:
AIR DRY @ 77°F Flash between coats:
10-20 Minutes
Reduction may accelerate flash times.
To Sand: 60-90 Minutes
To Topcoat: 30 Minutes* *Topcoat without sanding -
24 hrs max

TECHNICAL DATA:  
Volume Solids: 45.7% (RTS) Regulatory VOC: 204 g/L (1.7 lbs./gal.)
Pot Life: 2-3 Hours @ 77°F Actual VOC: 146 g/L (1.21 lbs./gal.)
 
Disposal/Safety: See MSDS for this product

MANUFACTURER REFERENCE:
KEEP OUT OF REACH OF CHILDREN. REFER TO MATERIAL SAFETY DATA SHEET
EMERGENCY MEDICAL & SPILL CONTROL CHEMTREC (800) 424-9300

Made in the USA for ABI/Autobody Brands International a division of IAMG/International
Autobody Marketing Group, Scottsdale, AZ 85257, www.autobodybrands.com

CONSERVEZ HORS DE PORTÉE DES ENFANTS. VOIR LA FICHE SIGNALETIQUE EN CASE DÅfURGENCES MÉDICALES OU ENVIRONMENTALES AU CANADA, COMPOSER LE NUMÉRO CHEMTREC (800) 424-9300
Fabriquee Aux E.U. - ABI/Autobody Brands International a division of IAMG/International
Autobody Marketing Group, Scottsdale, AZ 85257, www.autobodybrands.com

SAFETY INFORMATION FOR INDUSTRY USE ONLY:
DANGER! Contents are EXTREMELY FLAMMABLE. SEE CONTENTS ELSEWHERE ON LABEL. VAPOR AND SPRAY MIST HARMFUL. VAPOR MAY IGNITE EXPLOSIVELY. Keep away from heat, sparks and flame. Do not smoke. Keep area well ventilated during use and until all vapors are gone. Wear appropriate, properly fitted respirator (NIOSH/MSHA TC 19C or equivalent) during and after application. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately inhaling the contents can be harmful or fatal. Avoid contact with eyes and skin. Wash hands after use. Do not transfer contents to other containers for storage. Keep container closed when not in use. FIRST AID: In case of EYE CONTACT; flush eyes with large amounts of water. Get medical attention if irritation persists. IF SWALLOWED; Do not induce vomiting. Get medical attention immediately. IF INHALED; If affected remove victim from exposure. Restore breathing. Keep warm and quiet. READ AND FOLLOW WARNINGS ON ALL COMPONENTS. DO NOT TAKE INTERNALLY. PROP 65 WARNING: This product contains a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. DANGEREUX! Contenu TRÉS INFLAMMABLE. VOIR LA COMPOSITION DU CONTENU AILLEURS SURL’ÉTIQUETTE. Pendant L’utilisation et jusqu’ a la dispartion totale des vapeurs. LES BAPEURS ET TOUTE PUL VERISATION DU PRODUIT SONT DANGEREUSES. LES VAPEURS PEUVENTS S’ENFLAMMER ET EXPLOSER. MAINTENIR Á L’ÉCART DES ÉTINCELLES, DE LA CHALEUR ET DES FLAMMES. NE PAS FUMER. Garder l’espace bien aéré. Porter un repirateur á filtre du vapeur et particules, approprié et bien ajusté (NIOSH/MSHA TC19C ou un autre de même qualité) pendant et après la pulvérisation du produit. Contient des solvents capables de causer des dégâts permenents au cerveau ainsi qu au systeme nerveux. L’utilisation in appropriée de ce produit en le concentrant et en l’aspirant intentionnellement peut être dangereuse ou peut même causer la mort. Éviter tout contact avec les teux et la peau. Se laver les mains aprés usage. Garder le contenant fermé. Ne pas transvaser ce produit pour le conserver. PREMIERS SOINS: En cas de CONTACT AVEC LES YEUX; rincersoigneusment avec beaucoup d’eau. Voir le medécin si l’irritation persiste. Si avalé, voir le medécin immediatement. Si ASPIRÉ; Si affecté quitter les lieux. Rétablir la respiration. Rester calme et au chaud. En cas d’ingestion, ne pas faire vomir. BIEN LIRE LES AVERTISSMENTS CONCERNANT CHAQUE PRODUIT DE MÉLANGE. NE PAS ABSORBER. GARDER HORS DE LA PORTÉE DES INFANTS. VOIR LA FISHE SIGNALÉTIQUE.AVERTISSEMENT: Contient des substances chimiques connues de l’état de Californie comme dangereuses pour le systéme de reproduction et cause de défauts cogéntaux.
¡PELIGRO! Contenido EXTREMAMENTE INFLAMMABLE VEA INFORMACION DEL CONTENIDO EN OTRA PARTE DE LA ETIQUETA. VAPOR Y ROCIO DAÑINOS. Los apores pueden encenderse de forma explosiva. Manténgase alejado de chispas, calor o llamas. No fumar. Mantenga el lugar de buena ventilación durante su uso y hasta que los vapores hayan desaparecido. Use respirador apropiado y bien ajustado (NIOSH/MSHA TC 19C equivalente) durante y despues de la aplicacion. Contiene solventes que pueden causar daños permanentes al cerebro y al sistema nervioso. El uso erróneo de inhalar deliberadamente el contenido puede ser peligroso y hasta fatal. Evite el contacto com los ojos y la piel. Lávese las manos después del uso. No coloque el contenido en otros envases para almacenar. Mantenga cerrado el envase cuando no se usa. PRIMEROS AUXILIOS: Si Hubo contacto con los OJOS laveslos usando mucha agua. No induzca vómito. Consulte a un medico immediatamente. Si lo INHALO; Si le afecta, salga del lugar contaminado. Restablezca la funcion repiratoria. LEA Y SIGA LAS PRECAUCIONES EN LAS ETIQUETAS DE TODOS LOS COMPONENTES. NO INGIERA. MANTENGALO FUERA DEL ALCANCE DE LOS NINOS.VEA HOJA DE DATOS DE SEGURIDAD (MSDS). ADVERTENCIA: Contiene sustancias químicas conocidas en el estado de California de causar daños en el sistema reproductivo u otros defectos de nacimiento. DVERTductos químicos recocidos por el Estado de California como causantes de daños reprductivos y otros.

MANTENER FUERA DEL ALCANCE DE LOS NIÑOS. VER LA HOJA DE DATOS DE SEGURIDAD DE MATERIALES EMERGENCIAS MEDICAS Y CONTROL DE DERRAMES CHEMTREC (800) 424-9300
Hencho en los EE. UU. exclusivamente para ABI/Autobody Brands International a division of IAMG/International Autobody Marketing Group, Scottsdale, AZ 85257
www.autobodybrands.com

Call 1-87REFINISH (1-877-334-6474) to
find your local Advantage Refinish Products
supplier. Or visit our website:
www.autobodybrands.com