5 Star Autobody Products: Trim Black

Remove all loose paint and dirt from the surface to be coated. Surface must be thoroughly cleaned before application. Remove all wax, silicone, oil, grease and dirt with #5901 5 Star Wax & Grease Remover. Mask all adjacent areas to prevent overspray. Shake can well before using. Shake can vigorously for at least one minute after ball rattles inside can. For best results, spray 6 -12 inches from surface. Apply with a sweeping motion. Several thin coats are better than one heavy coat to prevent runs and drips. After getting complete coverage, allow to dry. Adhesion of coating will become stronger as the product thoroughly cures. Remove nozzle and clean if product clogs during use. Immediately after use, invert can and spray until clear to clean nozzle. Do not stick pins or other objects into nozzle.