XTREME
EuroStar 4.2 VOC Klearkote
PRODUCT DESCRIPTION:
#6101 EuroStar klearkote – An advanced new Klearkote system
designed to maximize speed and ease-of-use in the collision repair
shop. Formulated using advanced European technology, 6101 is a tough, durable urethane that helps make
shops more productive. Because it provides great gloss direct from the gun, buffing is minimized. Provides
high build, dries fast and is easy to spray with excellent flow out and leveling.Use on a variety jobs – from
small repairs to overall refinishing.
| PRODUCTS: |
| |
5 Liters |
2.5 Liters |
| XTREME EuroStar 4.2 VOC Klearkote |
|
|
| XTREME EuroStar 4.2 VOC Activator - Fast |
|
|
| XTREME EuroStar 4.2 VOC Activator - Medium |
|
|
| XTREME EuroStar 4.2 VOC Activator - Slow |
|
|
|
SURFACE PREPARATION:
Mask vehicle to protect from overspray. Apply basecoat and allow to dry according to paint
manufacturer’s directions.
MIXING DIRECTIONS:
Combine components by volume. Mix thoroughly and strain before using.
• 2 Parts #6101 EuroStar Klearkote – 4.2 VOC
• 1 Part #6102, 6103, or 6104 Activator
| APPLICATION DIRECTIONS: |
| Number of Coats: |
Wet 2 coats |
|
| Application Density |
Medium wet to wet |
|
| Overlap |
50% |
|
| |
|
|
| FLASH TIME: |
5 – 10 minutes in between coats
(@ 72° F / 22° C) |
|
| Film Thickness Range: |
2-4 |
|
| |
|
|
| TIME TO BUFF: |
18 - 24 hours (@ 72° F / 22° C). |
| |
Excessive film build and cool temperatures will extend dry times. |
| |
|
|
| Application Conditions |
|
|
| |
Minimum Temp: |
50°F (Substrate Temp.) |
| |
Max Temp: |
100°F (Substrate Temp.) |
| |
Ambient Humidity: |
Less than 80% preferred |
| |
|
|
| ADDITIVES: |
|
|
| Accelerator: N/A |
Fisheye: N/A |
Flex Additive: Not Required |
| Note: Do not spray when surface temperature is below 50°F. |
SUBSTRATES:
Commercially available basecoats with a VOC less than 6.6 lbs/gal
Properly prepared previously painted substrates.
POT LIFE:
1 – 2 Hours @ 72°F / 22°C.
CLEAN UP:
Clean spray equipment
immediately after use with gun wash solvent.
GUN SETUPS:
| CONVENTIONAL |
|
| Gravity Feed: |
1.4 mm – 1.6 mm |
| Siphon Feed: |
1.4 mm – 1.6 mm |
| HVLP: |
1.3 mm – 1.4 mm |
AIR PRESSURES
Conventional @ Gun |
Overall |
| Gravity Feed: |
55-60 psi |
| Siphon Feed: |
55-60 psi |
| HVLP @ Cap: |
8-10 psi |
| FLASH/DRY TIMES: |
| |
6102 @ or
above 77ºF |
6103 @ or
above 85 ºF |
6104 @ or
above 95 ºF |
| Flash Between Coats: |
5-10 min |
5-10 min |
5-10 min |
| Dust Free: |
10-15 min |
10-15 min |
10-15 min |
| Sand/Polish: |
18-24 hours |
18-24 hours |
18-24 hours |
| |
|
Force Dry
(Convection Heat) |
|
| Purge time before applying heat: |
0-15 min |
0-15 min |
0-15 min |
| Force Dry Time: |
20 min @ 165°F |
20 min @ 165°F |
20 min @ 165°F |
| Purge time before applying heat: |
After Cool Down |
After Cool Down |
After Cool Down |
|
TECHNICAL DATA: (Ready To Spray)
| Weight Solids: |
43.59% |
| VOC (Volatile Organic Content): |
4.2 lbs/gal |
| Film Build: |
2.0 mils recommended |
| Theoretical Coverage: |
2.9 sq. ft per 100 ml @ 3 mils |
SAFETY INFORMATION FOR INDUSTRY USE ONLY:
Danger: Vapor and spray mist harmful. Overspray may cause lung damage. May cause allergic skin and respiratory reaction, effects may be permanent.
Flammable liquid and vapor. Harmful if inhaled. May affect the brain or nervous system causing dizziness, headache, or nausea. May cause eye, skin, nose,
and throat irritation. Contents: See product label for contents and CAS #’s. The contents of this package must be blended with other components
before the product can be used.Any mixture of components will have hazards of all components. Before opening the packages, read all warning
labels. Follow all precautions. The material id designed for application only by professionally trained personnel using proper equipment under controlled
conditions, and is not intended for sale to the general public. KEEP OUT OF REACH OF CHILDREN
ABI/ A division of I.A.M.G. - Scottsdale,AZ - www.autobodybrands.com
Call 1-87REFINISH (1-877-334-6474) to
find your local 5 Star Autobody Products
supplier. Or visit our website:
www.autobodybrands.com
Top
|
|
