
XTREME
EuroStar 2.1 VOC Klearkote
PRODUCT DESCRIPTION:
#6115 EuroStar Klearkote – An advanced new Klearkote system
designed to maximize speed and productivity in low VOC collision
repair shops. Formulated using advanced European technology; EuroStar offers the ultimate in appearance and
performance with maximum output. This clear is a tough, durable, urethane helps increase productivity with quick
high-build coverage in only 2 – 3 coats, excellent flow out and leveling, fast dry times and great gloss from the gun
saving buffing time. Ideal for spot, panel, multi-panel and overall jobs.
| PRODUCTS: |
| |
5 Liters |
2.5 Liters |
| XTREME EuroStar 2.1 VOC Klearkote |
|
|
| XTREME EuroStar 2.1 VOC Activator - Fast |
|
|
| XTREME EuroStar 2.1 VOC Activator - Medium |
|
|
| XTREME EuroStar 2.1 VOC Activator - Slow |
|
|
|
SURFACE PREPARATION:
Mask vehicle to protect from overspray. Apply basecoat and allow to
dry according to paint manufacturer’s directions.
MIXING DIRECTIONS:
Combine components by volume.Mix thoroughly and strain before using.
• 2 Parts #6115 EuroStar Klearkote
• 1 Part #6116-2.5 EuroStar Fast Activator, #6117-2.5 Medium Activator, or
#6118-2.5 Slow Activator
| APPLICATION DIRECTIONS: |
| Number of Coats: |
2 – 3 coats |
|
| Application Density |
full single coats |
|
| Overlap |
50% |
|
| |
|
|
| FLASH TIME: |
5 – 10 minutes in between coats (@ 72° F / 22° C) |
| Thickness Range: |
2.0 mils |
|
| |
|
|
| TIME TO BUFF: |
Air Dry: 24 hours (@ 72° F / 22° C). |
| |
Force Dry: 2 hours after cool down. Excessive film build and cool temperatures will extend dry times. |
| |
|
|
| Application Conditions |
|
|
| |
Minimum Temp: |
50°F (Substrate Temp.) |
| |
Max Temp: |
100°F (Substrate Temp.) |
| |
Ambient Humidity: |
Less than 80% preferred |
| |
|
|
| ADDITIVES: |
|
|
| Accelerator: N/A |
Fisheye: N/A |
Flex Additive: Not Required |
| Note: Do not spray when surface temperature is below 50°F. |
SUBSTRATES:
Commercially available basecoats with a VOC less than 6.6 lbs/gal
Properly prepared previously painted substrates.
POT LIFE:
2 Hours @ 72°F / 22°C (6116 or 6117 Activators).
1 Hour @ 72°F / 22°C (6118 Activator).
CLEAN UP:
Clean spray equipment immediately
after use with gun wash solvent.
GUN SETUPS:
| CONVENTIONAL |
|
| Gravity Feed: |
1.4 mm – 1.6 mm |
| Siphon Feed: |
1.4 mm – 1.6 mm |
| HVLP: |
1.3 mm – 1.4 mm |
AIR PRESSURES
Conventional @ Gun |
Overall |
| Gravity Feed: |
55-60 psi |
| Siphon Feed: |
55-60 psi |
| HVLP @ Cap: |
6-10 psi |
| FLASH/DRY TIMES: |
| |
6116 @ or
above 77ºF |
6117 @ or
above 85 ºF |
6118 @ or
above 95 ºF |
| Flash Between Coats: |
5-10 min |
5-10 min |
5-10 min |
| Dust Free: |
10-15 min |
10-15 min |
10-15 min |
| Sand/Polish: |
18-24 hours |
18-24 hours |
18-24 hours |
| |
|
Force Dry
(Convection Heat) |
|
| Purge time before applying heat: |
15 min |
15 min |
15 min |
| Force Dry Time: |
20 min @ 165°F |
20 min @ 165°F |
20 min @ 165°F |
| Purge time before applying heat: |
After Cool Down |
After Cool Down |
After Cool Down |
|
TECHNICAL DATA: (Ready To Spray)
| Weight Solids: |
37.5% |
| Volume Solids: |
39.1% |
| VOC (Volatile Organic Content): |
2.1 lbs/gal |
| Film Build: |
2.0 mils recommended |
| Theoretical Coverage: |
600 sq. feet |
SAFETY INFORMATION FOR INDUSTRY USE ONLY:
Danger: Vapor and spray mist harmful. Overspray may cause lung damage. May cause allergic skin and respiratory reaction, effects may be permanent.
Flammable liquid and vapor. Harmful if inhaled. May affect the brain or nervous system causing dizziness, headache, or nausea. May cause eye, skin, nose,
and throat irritation. Contents: See product label for contents and CAS #’s. The contents of this package must be blended with other components
before the product can be used. Any mixture of components will have hazards of all components. Before opening the packages, read all warning
labels. Follow all precautions. The material id designed for application only by professionally trained personnel using proper equipment under controlled
conditions, and is not intended for sale to the general public. KEEP OUT OF REACH OF CHILDREN
ABI/ A division of I.A.M.G. - Scottsdale, AZ - www.autobodybrands.com
Call 1-87REFINISH (1-877-334-6474) to
find your local 5 Star Autobody Products
supplier. Or visit our website:
www.autobodybrands.com
Top
|
 |