XTREME
Single-Stage Custom Colors
PRODUCT DESCRIPTION:
XTREME #7000 Series 2.8 VOC Polyurethane Colors are high solids, low VOC coatings intended for use as a protective maintenance coating
for automotive and industrial applications, surfaces exposed to humidity, chemicals and corrosive elements.
#7000 SERIES
CUSTOM COLOR/REDUCERS/CATALYST: |
| CUSTOM COLORS |
Gallon |
| Gloss Black |
#7000-01 |
| Flat Black |
#7001-01 |
| Gloss White |
#7003-01 |
| Fleet White |
#7006-01 |
| Oxford White |
#7007-01 |
| Charcoal Mist Metallic |
#7008-01 |
| Brilliant Black Pearl |
#7009-01 |
| Viper Red |
#7010-01 |
| Swift Red |
#7011-01 |
| Candy Apple Red |
#7012-01 |
| Wine Red Mica |
#7013-01 |
| Red Crystal Pearl |
#7014-01 |
| Omaha Orange |
#7015-01 |
| Imperial Orange Metallic |
#7016-01 |
| Corvette Yellow |
#7017-01 |
| Jaguar Racing Green |
#7018-01 |
| Dark Green |
#7019-01 |
| Light Blue Metallic |
#7020-01 |
| Teal Metallic |
#7021-01 |
| Spectra Blue Metallic |
#7022-01 |
| Hi-Lite Blue Pearl |
#7023-01 |
| Dark Blue Metallic |
#7024-01 |
| Gold Metallic |
#7025-01 |
| Champagne Metallic Pearl |
#7026-01 |
| Galaxy Silver |
#7027-01 |
| |
|
| PREMIUM REDUCERS |
Quart |
| 2.8 VOC Premium Reactive Reducer |
#7030-04 |
| Premium Urethane Reducer - Slow |
#7032-04 |
| Premium Urethane Reducer - Fast |
#7034-04 |
| Premium Urethane Reducer - Very Slow |
#7036-04 |
| Premium Urethane Reducer - Medium |
#7038-04 |
| |
|
| POLYURETHANE CATALYST |
Quart |
| 2.8 VOC Polyurethane Catalyst |
#7040-04 |
| |
|
| POLYURETHANE CATALYST |
HALF PINT |
| 2.8 VOC Polyurethane Catalyst |
#7040-16 |
PRODUCT DESCRIPTION:
1. Finish sand repair areas with 400-600 wet, 320 grit or equivalent dry.
2. Clean repair areas with a pre-paint cleaner. Wipe off any residue with
a clean cloth.
3. Use a tack cloth to remove any surface contaminates that may have settled on the repaired areas prior to paint application.
4. Apply
appropriate sealer on bare metal areas.
5. Apply #7000 Series 2.8 VOC color.
| MIXING DIRECTIONS: |
| 2.8 VOC |
| 4 PARTS |
#7000 Series Custom Color |
| 1 PART |
#7040 Catalyst |
| 1 PART |
#7030 Reducer |
| |
|
| OPTIONAL NATIONAL RULE 5.0 VOC |
| 4 PARTS |
#7000 Series Custom Color |
| 1 PART |
#5186/5187/5188 Activator |
| 1 PART |
Urethane Reducer |
APPLICATION DIRECTIONS & POT LIFE:
Adjust air pressure to 40-50 psi at gun for gravity, siphon feed guns or HVLP use 6-10 psi at air cap. Apply 2-3 medium coats (maximum 2 mils wet
per coat) or until hiding is achieved. Allow a 15-20 minute flash time between coats and before force drying. Pot Life: 4 hours minimum.
RECOATING:
2.8 VOC XTREME #7000 Series Single Stage Custom Polyurethane Color may be recoated after 16-24 hours at 77° F. Must be lightly sanded/scuffed
before additional color or clearcoat may be applied.
CLEAN-UP:
Clean spray equipment immediately after use with high quality lacquer thinner.
| FLASH/DRY TIMES: |
| DRY TIMES AT 77° F |
| FLASH: 15-20 Minutes |
| TO DELIVER: 16-24 Hours |
| |
| FORCE DRYING |
| 15 Minutes @ 77° F |
| 40 Minutes @ 140° F |
| |
| PLEASE NOTE: Not recommended for use in temperatures below
60° F. Use below these temperatures will effect
dry times and performance. |
TECHNICAL DATA:
| Color: |
Various |
| Weight Solids (RTS): |
59.9 - 63.9% |
| Pot Life: |
4 hours minimum |
| V.O.C. (RTS): |
@ 4:1:1 - 2.8 lbs/gal |
| Mixing Ratio (2.8 VOC): |
4:1:1 |
Optional Mixing Ratio National Rule (5.0 VOC) 4:1:1 |
| Viscosity #2 Zahn (RTS): |
30 - 35 seconds #2 Zahn |
| Film Build per coat: |
Recommended 2 mils |
| Disposal/Safety: |
See MSDS for this product |
Call 1-87REFINISH (1-877-334-6474) to
find your local 5 Star Autobody Products
supplier. Or visit our website:
www.autobodybrands.com
Top
|
