XTREME
DTM High Build Primer – Black
XTREME #5424 Direct to Metal Primer is a 2K epoxy hybrid product that exhibits
anti-corrosion characteristics, excellent adhesion, exceptional filling capabilities,
and ease of sanding. The addition of reducer makes it a great 2K sealer, and it’s black
color provides a neutral base to paint over.
BENEFITS:
Direct to Metal Primer - Does not require a self-etching primer, eliminating extra labor,
time, and gun clean-up costs! Primer Filler - As a high build filler this product is capable of
2.5-3.0 mils per coat requiring less coats per application. Combined with easy sanding, this
product will reduce repair time and increase shop productivity! Primer Sealer - The addition of
urethane reducer or acetone makes
#5424 an excellent primer sealer.
Highly versatile, #5424 is the perfect
alternative to replace three products
with one!
PRODUCT DESCRIPTION:
XTREME #5424 is formulated with a hybrid of epoxy and acrylic polymers,which provide excellent adhesion, good corrosion
resistance, productive dry times, and ease of sanding.
FEATURES:
• 4:1 Mix Ratio - High Build Primer Filler
• 4:1:1 Mix Ratio - Regular Build Primer Filler
• 4:1:2 Mix Ratio - Primer Sealer
• Easy to Apply in 1 - 3 Coats
• Excellent Adhesion
• Great Corrosion Resistance
• Dry to Sand in 60 minutes
• Easy to Sand
| PRODUCTS: |
| |
Gallon |
Quart |
Half Pint |
| Primer (BLACK) |
#5424-1 |
#5424-4 |
|
| Primer Activator |
|
#5426-4 |
#5426-16 |
|
SURFACE PREPARATION:
Clean all areas to be primed with compliantWax & Grease Remover to remove all
dirt,wax, grease, and other contaminants. Featheredge and sand the original finish.
Surface must be clean and dry. Note: Rust and oxidation must be removed prior to
applying primer by sanding, grinding, or sand blasting.
| MIXING DIRECTIONS: |
| Hide Build Primer Filler |
•
• |
4 PARTS XTREME #5424 DTM Primer
1 PART XTREME #5426 Activator |
|
| |
Regular Build Primer Filler
|
•
•
• |
4 PARTS XTREME #5424 DTM Primer
1 PART XTREME #5426 Activator
1 PART Urethane Reducer - Nat’l Rule
Acetone - California |
|
| |
| Primer Sealer |
•
•
• |
4 PARTS XTREME #5424 DTM Primer
1 PART XTREME #5426 Activator
2 PARTS Urethane Reducer - Nat’l Rule
Acetone - California |
|
APPLICATION DIRECTIONS:
Spray one to three medium wet coats allowing 10-20 minutes flash between coats.
POT LIFE:
2-3 hours @ 77° F.
ADDITIVES:
ACCELERATOR: N/A
FISHEYE: N/A
FLEX ADDITIVE: Not required
Note: Do not spray when surface temperature is below 50°F.
CLEAN UP:
Clean spray equipment immediately after use with 5 STAR #5414 VirginWash Thinner.
| SUBSTRATES: |
•
|
Properly cleaned and sanded aluminum, steel, galvanized steel or sand blasted steel. |
•
|
Properly cleaned and sanded fiberglass, SMC, E-Coat and OEM finish. |
| GUN SETUP: |
| CONVENTIONAL |
|
| Gravity Feed: |
1.6 mm - 2.0 mm |
| Siphon Feed: |
1.8 mm - 2.0 mm |
| HVLP: |
1.6 mm - 2.0 mm |
| |
|
| AIR PRESSURES |
|
| Conventional @ Gun |
PANEL |
OVERALL |
| Gravity Feed |
30-35 psi |
40-45 psi |
| Siphon Feed |
30-40 psi |
45-55 psi |
| HVLP @ Cap |
6-8 psi |
8-10 psi |
|
| FLASH/DRY TIMES: |
| AIR DRY @ 77 degrees F |
| |
|
Please Note: |
| Flash between coats: |
10-20 Minutes |
Reduction may accelerate flash times. |
| To Sand: |
60-90 Minutes |
|
| To Topcoat : |
30 Minutes* |
*To Topcoat without sanding - 24 hrs max |
TECHNICAL DATA:
| Volume Solids: |
44.7% (RTS) |
| Pot Life: |
2-3 Hours @ 77 degrees F |
| VOC Coating: |
2.77 lbs. per gallon |
| VOC Material: |
2.08 lbs. per gallon |
| Disposal/Safety: |
See MSDS for this product |
SAFETY INFORMATION – FOR INDUSTRY USE ONLY:
Danger: Vapor harmful.May affect the brain or nervous system causing dizziness, headache, or nausea. May cause eye, skin, nose, and throat irritation. Harmful
if swallowed. Precautions: Vapors may ignite explosively. Keep away from heat, sparks, and flame. Vapors may cause flash fire.Do not smoke. Extinguish all flames
and pilot lights, and turn of stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by
opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe vapor or spray mist. Do not get in eyes, on
skin or clothing. Wash thoroughly after handling. Wear solvent resistant gloves. The material id designed for application only by professionally trained personnel
using proper equipment under controlled conditions, and is not intended for sale to the general public. KEEP OUT OF REACH OF CHILDREN. ABI - Autobody
Brands International a division of IAMG - International Autobody Marketing Group - Scottsdale, AZ - www.autobodybrands.com
Call 1-87REFINISH (1-877-334-6474) to
find your local 5 Star Autobody Products
supplier. Or visit our website:
www.autobodybrands.com
Top
|
|
