Pro-Seal Sealers
Urethane Sealant (Black)

5280

PRODUCT DESCRIPTION:
5 Star Pro-Glass Urethane Sealant is a user friendly, medium to fast setting autoglass urethane that provides excellent strength because of its powerful adhesion to glass and metal. Pro-Glass meets all O.E.M. standards and applicable motor vehicle safety requirements (U.S. MVSS 212 & 216). Pro-Glass can also be used as a high strength single component seam and joint sealer for re-applying moldings and ground effects.

Pro-Glass may be applied with any standard manual or air driven caulking gun. Available in Black.

FEATURES:
1. Very tough
2. Excellent shelf life
3. High solids
4. Compatible with all automotive paints
5. Automotive & construction uses
6. Superb tooling qualities

APPLICATION:
Surfaces that seam and joint sealers are going to be applied to must be dry, clean, grease and oil free. If installing windshields, please follow the car manufacturers instructions for replacing windshields.

APPLICATION DIRECTIONS:
1. Insert the cartridge into a standard manual or pneumatic caulking gun.
2. Cut the nozzle of the cartridge.
3. Using a long punch, etc., insert into the nozzle to break the seal inside the cartridge.
4. Caulk and tool the Pro-Glass Urethane Sealant into required area.
6. Allow to dry for at least 1 hour before painting.
7. Full dry time will vary depending on room temperature.
8. Applying heat may decrease dry time.

CLEAN-UP:
Not required.

SAFETY INFORMATION FOR INDUSTRY USE ONLY:
Danger: Vapor harmful.May affect the brain or nervous system causing dizziness, headache, or nausea. May cause eye, skin, nose, and throat irritation. Harmful if swallowed. Precautions: Vapors may ignite explosively. Keep away from heat, sparks, and flame.Vapors may cause flash fire. Do not smoke. Extinguish all flames and pilot lights, and turn of stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe vapor or spray mist. Do not get in eyes, on skin or clothing.Wash thoroughly after handling.Wear solvent resistant gloves. The material id designed for application only by professionally trained personnel using proper equipment under controlled conditions, and is not intended for sale to the general public. KEEP OUT OF REACH OF CHILDREN. ABI/Autobody Brands International a division of IAMG - Scottsdale,AZ - www.autobodybrands.com

Call 1-87REFINISH (1-877-334-6474) to
find your local 5 Star Autobody Products
supplier. Or visit our website:
www.autobodybrands.com

Top